- Out of stock
7.4V 5200mAh 2S LiPo RC Battery, 50C, T Plug
PCEONAMP 7.4V 5200mAh 2S LiPo battery 50C – High-Rate Power for 1/8 & 1/10 RC Cars
Built for 1/8 and 1/10 scale 4WD cars and trucks, this 7.4V 5200mAh 2S LiPo battery 50C delivers 260A continuous discharge with minimal voltage sag — sustained top speed, hard acceleration off the line, and consistent output through full runs.
Key Specs:
• 2S (2 cells), 7.4V nominal (3.7V/cell), 8.4V full charge (4.2V/cell)
• 5200mAh / 38.5Wh | 50C continuous (260A)
• 139 × 47 × 25 mm / 264 g
• Deans T-Plug (anti-spark)
• Hard PVC shrink wrap, vibration-resistant construction
⚠️ Standard 2S (3.7V/cell) LiPo. NOT compatible with 3S (11.1V) or 4S (14.8V) systems. Verify your ESC and receiver support 7.4V 2S before ordering.
Drop-in replacement: Sized to fit standard 1/8 and 1/10 scale battery compartments. No wiring, no soldering — remove the old pack, drop this in, connect the T-Plug.
Ideal for: 1/8 4WD buggies, 1/10 short course, rock crawling, bashing, track racing.
PCEONAMP 7.4V 5200mAh 2S LiPo battery 50C – the reliable power source behind every fast lap.
The 7.4V 5200mAh 2S LiPo battery 50C from PCEONAMP is engineered for the unforgiving.
Note: Some images are AI-rendered for illustration. Actual product may vary slightly.
Frequently Asked Questions
How should I charge this LiPo battery?
LiPo batteries require a dedicated LiPo charger (not a standard USB cable). Connect your charger to the charge port on the battery, set it to 2S LiPo mode, and charge at 1C (approximately 5.2A) for a full charge. Never leave a LiPo battery unattended while charging.
Which RC vehicles is this battery compatible with?
This 7.4V 2S LiPo battery fits 1/8 and 1/10 scale RC cars and trucks that use a Deans T plug and 7.4V (2S) power system. Verify your vehicle's battery compartment size (minimum 139 x 47 x 25mm), voltage (7.4V / 2S), and plug type before ordering.
What does 50C mean and why does it matter?
The C-rate indicates how much current the battery can safely deliver. A 50C rating on a 5200mAh pack means it can sustain up to 260A of current. In practical terms, this means the battery can handle the power demands of 1/8 scale motors without significant voltage drop, giving you consistent acceleration and top speed throughout the run.
How long does a full charge take?
At a standard 1C charge rate (approximately 5.2A), a full charge takes about 60–70 minutes. Charging at higher rates (up to 2C) can reduce this to approximately 30–40 minutes. Always use a LiPo-specific charger with balance support.
How should I store this LiPo battery?
Store in a cool, dry place in a LiPo-safe storage bag or case. For storage over 1 month, charge to storage voltage (approximately 3.8V per cell, or 7.6V total). Do not store at full charge or fully drained. Keep away from heat, metal objects, children, and pets.